เครื่องปริ้น canon g3010 ขึ้น e03

หน้าแรก > บทความ > Code Error และวิธีการแก้ไขด้วยตนเองเบื้องต้น

Error Code is Displayed on LED

ไฟแสดงสถานะในกรณีเครื่องพิมพ์มีปัญหา เบื้องต้นลูกค้าสามารถดูCode Error ได้จากจอแสดงผลเพื่อจะได้รู้ว่าเครื่องพิมพ์มีปัญหาอะไรครับ

1. E02 มีปัญหาในส่วนของระบบกระดาษ ใส่กระดาษและกดปุ่มทำสำเนาสีหรือดำ
2. E03 มีปัญหาในส่วนของช่องกระดาษ ให้ตรวจเช็คช่องกระดาษว่ามีอะไรไปติดหรือไม่จากนั้นปิดเครื่องแล้วเปิดใหม่
3. E04,E05 เครื่องไม่รู้จักตลับหมึก ให้นำตลับหมึกออกมาทำความสะอาดลายวงจรและใส่เข้าไปใหม่
4. E07 ตลับหมึกไม่ได้ถูกติดตั้ง เปิดฝาสแกนเพื่อตรวจเช็คว่ามีตลับหมึกหรือไม่
5. E08 แผ่นซับหมึกใกล้เต็ม
6. E13 เครื่องฟ้องหมึกหมด ให้กดปุ่ม Stop / Reset ค้างไว้ประมาณ 15 วินาที
7. E14 เครื่องไม่รู้จักตลับหมึก ให้ถอดตลับหมึกออกมาทำความสะอาดลายวงจร
8. E15 เครื่องไม่รู้จักตลับหมึก ให้ถอดตลับหมึกออกมาทำความสะอาดลายวงจร
9. E16 เครื่องฟ้องหมึกหมดให้กดปุ่ม Stop / Reset ค้างไว้ประมาณ 15 วินาที
10. E30 มีปัญหาในส่วนของการตั้งค่าขนาดกระดาษ
11. E31 มีปัญหาในการเชื่อมต่อ USB ให้ตรวจเช้ค USB
12. E50 การสแกนในการจัดตำแหน่งหัวพิมพ์ล้มเหลว ให้กดปุ่ม Stop / Reset เพื่อยกเลิก
13. P02 เครื่องทำงานผิดพลาด ตรวจเช็คสิ่งแปลกปลอมในเครื่องและนำออก
14. P07 แผ่นซับหมึกเต็ม ต้องเคลียร์แผ่นซับหมึก
15. P10 Mainboard มีปัญหา

วิธีแก้ไขเมื่อกระดาษติด
-เอาสายไฟออกก่อนเสมอ ดึงกระดาษออกทางด้านเครื่องทุกครั้ง แต่หากเอาออกจากด้านหน้าเครื่องไม่ได้ก็ให้ดึงออกทางด้านหลังแต่ต้องระวังหากดึงไม่ออกอย่าฝืนดึง อาจจะทำให้อะไหล่ของเครื่องเสียได้ครับ

If the orange light is lit and the E03 support code displays on your printer, there is a paper jam.

Support codes 1300, 1303, and 1304 also indicate a paper jam.

Fix a paper jam

If you need to turn off the machine to remove jammed paper during printing, press the Stop/Reset button to cancel print jobs before turning off the machine.

Jammed paper may be found in the following locations. Click the paper jam issue that matches your occurrence to find the solution:

Paper output slot
In the transport unit (the rear of the printer)
Inside the printer
In the back of the printer during automatic duplex (2-sided) printing

Paper Is Jammed in the Paper Output Slot

If you can see the jammed paper at the paper output slot, remove the paper following the procedure below.

Pull the paper out slowly.
Hold the paper with your hands, then pull the paper out slowly not to tear it.

Do not pull the paper out from the front tray even though you can see the jammed paper at the front tray. Pulling the paper out forcibly from the front tray may damage the machine.

If you cannot pull the paper out, turn the machine off and turn it back on. The paper may be ejected automatically.

If you cannot pull the paper out from the paper output tray, try to pull the paper out from the transport unit.

If the paper tears and you cannot remove the jammed paper from the paper output slot, open the paper output cover to remove the paper.

Reload the paper, and press the Stop / Reset button on the machine.
If you turned off the machine in step 1, all print jobs in the queue are canceled. Reprint if necessary.

When reloading the paper, confirm that you are using the paper suited for printing and are loading it correctly.

We recommend you use paper other than A5 sized one to print documents with photos or graphics; otherwise, the printout may curl and cause paper exit jams.

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, service is required.

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

Paper Is Jammed inside the Machine at the Transport Unit

If you can see the jammed paper at the front tray, or you cannot see the paper either at the paper output slot or at the front tray, remove the paper from the transport unit.

Remove the paper following the procedure below.

Turn the machine off, then unplug the power cord.
Stand the machine with the right side facing down.
If you can see the jammed paper at the front tray, stand the machine with the front tray open.

When you stand the machine, confirm that the document cover is closed.

Stand the machine on a wide and flat surface such as a desk.

When you stand the machine, hold it securely and be careful not to hit it on a hard object.

Push the open lever to open the transport unit.
(A) open lever
When you open the transport unit, support the machine with your hand so that it does not fall down.

Pull out the jammed paper slowly.
When you pull the jammed paper, support the machine with your hand so that it does not fall down.

If the paper is rolled up and it is difficult to remove, grasp the edges of the paper, then remove the jammed paper.

If you cannot remove the jammed paper from the transport unit, close the transport unit, stand the machine upright, then open the paper output cover to remove the paper.

Close the transport unit.

After you close the transport unit, do not keep the machine standing upright.

Plug the machine back in and turn the machine back on.
Reload the paper.
All print jobs in the queue are canceled. Reprint if necessary.

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, service is required.

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

Paper Is Jammed inside the Machine

If the jammed paper tears and you cannot remove the paper either from the paper output slot or from the transport unit, or the jammed paper remains inside the machine, remove the paper following the procedure below.

Turn off the machine, and unplug the power cord of the machine from the power supply.
Open the paper output cover.
Remove the paper on the front tray if any.

Do not touch the clear film (A).

If the paper or your hands touch these parts and blot or scratch them, the machine can be damaged.

Make sure that the jammed paper is not under the FINE cartridge holder.
If the jammed paper is under the FINE cartridge holder, move the FINE cartridge holder to the right edge or the left edge whichever is easier to remove the paper.
When you move the FINE cartridge holder, hold the FINE cartridge holder and slide it slowly to the right edge or the left edge.
Hold the jammed paper with your hands.
If the paper is rolled up, pull it out.
Pull the paper slowly not to tear it, then pull the paper out.
Make sure that all the jammed paper is removed.
If the paper is torn, a piece of paper may remain inside the machine. Check the following and remove the piece of paper if it remains.

Does the piece of paper remain under the FINE cartridge holder?

Does the little piece of paper remain inside the machine?

Does the piece of paper remain in the right side or the left side space (B) inside the machine?

Close the paper output cover, then reload the paper.
All print jobs in the queue are canceled. Reprint if necessary.

If the message about paper jam is displayed on the computer screen when you resume printing after removing all the jammed paper, a piece of paper may remain inside the machine. In this case, confirm that no piece of paper remains inside the machine.

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, service is required.

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

Paper Is Jammed When Automatic Duplex Printing
If the paper is jammed when performing automatic duplex printing, remove the paper following the procedure below.

Pull the paper out slowly from the paper output slot.
Hold the paper with your hands, then pull the paper out slowly not to tear it.

Do not pull the paper out from the front tray even though you can see the jammed paper at the front tray. Pulling the paper out forcibly from the front tray may damage the machine.

Reload the paper
, and press the Stop/Reset button on the machine.
If you were not able to remove the paper out in step 1:
Follow the procedure below to remove the paper from the transport unit.
Turn the machine off, then unplug the power cord.
Stand the machine with the right side facing down.

When you stand the machine, confirm that the document cover is closed.

Stand the machine on a wide and flat surface such as a desk.

When you stand the machine, hold it securely and be careful not to hit it on a hard object.

Push the open lever to open the transport unit.

(A) open lever

When you open the transport unit, support the machine with your hand so that it does not fall down.
Pull out the jammed paper slowly.
When you pull the jammed paper, support the machine with your hand so that it does not fall down.

If the paper is rolled up and it is difficult to remove, grasp the edges of the paper, then remove the jammed paper.

If you cannot remove the jammed paper from the transport unit, close the transport unit, stand the machine upright, then open the paper output cover to remove the paper.

Close the transport unit.

After you close the transport unit, do not keep the machine standing upright.

Plug the machine back in and turn the machine back on.
Reload the paper.
All print jobs in the queue are canceled. Reprint if necessary.

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, service is required.

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account