This paper finds to get the precision of angular position control for DC geared motor using PID controller. The Arduino microcontroller board is mainly used to control the 12V brushed Namiki DC motor. L298N dual H-bridge motor driver is applied to execute the pulse width modulation (PWM) signal and to drive the direction control. The implementation code is considered to generate the PWM output using PID (proportional, integral and derivative) tuning algorithms. According to the PID tuning…
Figures from this paper
28 Citations
4 References
This library is compatible with all architectures so you should be able to use it on all the Arduino boards.
Releases
To use this library, open the Library Manager in the Arduino IDE and install it from there.
Abstract: This paper finds to get the precision of angular position control for DC geared motor using PID controller. The Arduino microcontroller board is mainly used to control the 12V brushed Namiki DC motor. L298N dual H-bridge motor driver is applied to execute the pulse width modulation (PWM) signal and to drive the direction control. The implementation code is considered to generate the PWM output using PID (proportional, integral and derivative) tuning algorithms. According to the PID tuning method, errors are not only solved but also taken to its minimal value with very low amount of error oscillations. In this work, step input, sine input and potentiometer input are tested to analyze the system performance. The results were clearly seen, the controller output response curve is very well-matched to approach the desired position.